solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number / ordering information 1 / ssr30c __ __ __ screening 2 / __ = not screened tx = tx level txv = txv s = s level package s1 = smd1 voltage 100 = 1000 v 120 = 1200 v smd1 SSR30C100S1 & ssr30c120s1 30 a / 1200 v schottky silicon carbide rectifier features: ? 1200 volt silicon carbide schottky rectifier ? average output current 30 amps ? no reverse recovery ? no forward recovery ? no switching time change over temperature ? small package size ? tx, txv, and space level screening available. 2 / consult factory. maximum ratings 3 / symbol value units peak repetitive and peak reverse voltage SSR30C100S1 ssr30c120s1 v rrm v r 1000 1200 volts average rectified forward current 4 / (resistive load, 60 hz, sine wave) total i o 30 amps peak surge current 4 / (8.3 ms pulse, half sine wave, t a = 25 o c) total i fsm 120 amps operating & storage temperature t op & t stg -55 to +250 o c junction temperature t j -55 to +250 o c maximum thermal resistance 4 / (junction to case) total r jc 0.8 o c/w notes: 1 / for ordering information, price, and availability contact factory. 2 / screened to mil-prf-19500. 3 / unless otherwise specified, all electrical characteristics @25oc 4 / terminal pads 1 & 3 must be connected toget her for testing and at the board level. note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: sh0043b doc
electrical characteristics 3 / 4 / symbol min typ max units instantaneous forward voltage drop (t a =25oc, pulse) i f = 10 a i f = 20 a i f = 30 a i f = 40 a v f1 v f2 v f3 v f4 ?? ?? ?? ?? 1.25 1.65 1.8 2.0 1.45 1.75 2.25 --- v dc instantaneous forward voltage drop (pulse) t a = -55oc, i f = 20 a t a = 150 oc, i f = 20 a v f5 v f6 ?? ?? 1.5 2.6 2.0 2.9 v dc reverse leakage current (rated v r , t a = 25oc, pulse) i r1 ?? 250 1500 a reverse leakage current (rated v r , t a = 150oc, pulse) i r2 ?? 1 5 ma junction capacitance (v r = 10v, f = 1mhz, t a = 25 o c) c j ?? 1250 2000 pf notes: * pulse test: pulse width = 300 sec, duty cycle = 2% 1 / for ordering information, price, and availability contact factory. 2 / screened to mil-prf-19500. 3 / unless otherwise specified, all electrical characteristics @25oc 4 / terminal pads 1 & 3 must be connected toget her for testing and at the board level. available part numbers: SSR30C100S1 ssr30c120s1 pin assignment package pin 1 pin 2 pin 3 smd1 anode cathode anode smd1 outline: tolerances (unless specified): .xx = .030? .xxx = .010? solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR30C100S1 & ssr30c120s1 note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: sh0043b doc
|